Ski Size Chart Imperial
Ski Size Chart Metric

NEO 2 - FACTORY TEST SKIS

ALL SKIS ARE NEW BUT SLIGHTLY OFF SPEC.
These skis are NOT available on the trial program.

Same Name - Radical Change

NEO 2 approaches the slalom course challenge from the other end of the spectrum.

Our design starting point was to analyze and match the skier's position and stance at every point throughout the course.

The back half of the ski has a progressively larger and rounder bevel that provides depth and stability as the ski drifts into angle.

When you move forward over the ski tip, into and through the turn, and expect that cross-course acceleration, the ski increases support, lift and angle. As additional pressure is applied to the tip, the more the ski reciprocates, by providing support from the smaller, tighter radiused bevels and decreased tunnel volume.

One of the most significant changes compared with prior D3 slalom skis is the change in bevel angle. This bevel angle change allows you to stay upright and level, from the wake into the outbound swing into the buoy.

Tunnel concave has been optimized to promote width in the course without an unwanted excess of speed in the turns.

While the name is the same, everything has changed.

Give the NEO 2 a test ride. It is ready for you in four different sizes - 65", 66", 67" and 68".

The NEO 2 features:

• Ski Profile - Wider front / narrower tail.
• Tunnel Concave - Optimized to promote width in the course without unwanted excess of speed in the turns.
• Rocker Profile - Higher rocker - Designed to promote the ideal turn at each buoy.
• Tail Shape - Narrower tail means less resistance which allows the tail to rotate the ski into immediate angle.
• Bevel Angle - Totally new design allows you to stay upright and level over the ski.
• Bevel Shape - The back half of the ski has a progressively larger and rounder bevel that provides depth and stability.
• Machine Screw Inserts - Accommodates D3, Reflex and most current binding hole patterns. All inserts are set in hard PVC anchor blocks for trouble free screw retention.
• Accuset Fin Block - Accurate, three-point set screws for easy fin adjustments and laser aligned fin position.
• Sizes - 65", 66", 67" and 68"

FACTORY TRIAL PROGRAM SKIS AVAILABLE NOW

For the most up to date info and to determine what size NEO 2 might be right for you, call our
TECHNICAL SUPPORT TEAM at (253) 797-0314 or email at info@d3skis.com